PT100 Flat Temperature Sensors
Simplex (Single element) stator winding RTDs The Stator winding temperature detector (RTD) are used to measure winding temperature of large Motors, Generators etc. These sensor are sandwiched between the windings of Motors/Generators.
Simplex (Single element) stator winding RTDs The Stator winding temperature detector (RTD) are used to measure winding temperature of large Motors, Generators etc. These sensor are sandwiched between the windings of Motors/Generators. Unlike on/off devices, It allows continuous measurement of winding temperature. Normally six sensors are recommended for each motor, Two per Phase. This RTD are generally flat type in construction and are available in various sizes.
| Technical Specification | Details |
|---|---|
| • Type | PT 100(100 ohm at 0 degC) |
| • Model | TSRE series Body |
| • Temperature Range | -50 to 250 C |
| • Temperature Class | Class F(Temperature limit:155 DegC) or Class H(Temperature limit:180 DegC) |
| • Calibration Standard | IEC 60751 Or DIN 43760 |
| • Material | Fibre Glass Epoxy |
| • Probe Material | Glass Fiber |
| • Calibration Standard | IEC 60751 Or DIN 43760 |
| • Accuracy | Class A/B/2B |
| • Sensing Current | 10mA maximum |
| • Length | 150MM |
| • Make | Thermo Sensors |
